Description
- Official Ride-On Product.
- Sold Each Bottle
- Balances and Seals Holes
- For a case, order 12
- Used by our service department
Ride-On Tire Protection System is a tire balancer and sealant compound that evenly coats the inner surface of tires. This coating balances tires and makes them into self-sealing tires while you ride. Eliminates need for those old, ugly wheel weights. Specially formulated to hydrodynamically balance high-speed tires, dampen road noise and vibrations that cause a rough ride. If your tire is punctured, the centrifugal force of the rotating tire and the internal air pressure forces Ride-On into the hole, sealing it instantly (up to 1/4″ in tubeless tires and 1/8″ in tube tires). Ride-On is a green, biodegradable product that is designed to be non-hazardous and non-flammable and contains corrosion inhibitors that protect all alloys of steel, aluminum, magnesium and yellow metals against oxidation.
Motorcycle Dosage Calculations
In order to calculate the dosage requirements for an motorcycle tire you need to use the following formula.
Width (in.) X Height (in.) X .06 = dosage round to the nearest ounce.
You may add up to 25% more product for use without wheel weights or in Severe Applications.
Sample Tire: 180/60R16
180 = tire width in millimeters
60 = aspect ratio = % of tire width that each sidewall is tall
16 = wheel diameter in inches (in)
To convert from millimeters to inches multiply by .0393
Example:
Width = 180 x .0393 = 7.1 inches
Height = 7.1 inches x .60 x 2 (two sidewalls) + 16 = 24.52 inches
Dosage =7.1 x 24.52 x .06 = 10 ounces
Severe dosage = 10 x 1.25 = 13 ounces
Ride-On (TPS) is tire pressure monitor sensor (TPMS) friendly in TPMS sensors that are hermetically sealed.
Reviews
There are no reviews yet.